WAVEMAKER® G4 MINI FULL

This fully loaded instrument is capable of working with all of the pipe and tube transduction systems produced by GUL. It is suitable for both the lower frequencies that are used for buried and coated pipes and the higher frequencies that are used with HD rings for support inspection and higher sensitivity to pitting. With one button press, the instrument can be placed into gPIMS Collector mode to allow a minimally trained operator to collect repeat data from a permanently installed gPIMS sensor.

The instrument contains 16 channels; therefore you will need a pair of channel reducers when joining EFC or HD inflatable rings together to collect data on very large diameter pipes.

https://www.guided-ultrasonics.com/wp-content/uploads/2016/08/Lightweight_rev0a_Product_Icons_frame500x500-e1471875250630.jpg

Lightweight

https://www.guided-ultrasonics.com/wp-content/uploads/2016/08/Icon-Diagnostics-e1470318356103.png

On board diagnostic channel

Icon - Battery

Battery operation

https://www.guided-ultrasonics.com/wp-content/uploads/2016/08/Icon-Running-e1471875831528.png

High Speed Data Acquisition

https://www.guided-ultrasonics.com/wp-content/uploads/2016/08/Icon-LCD-Screen-e1470317670120.png

7” LCD Touch Screen

https://www.guided-ultrasonics.com/wp-content/uploads/2016/08/Icon-ID-e1471876058190.png

Operator Identification

Icon - 16 Channel

16 Data Channels

Icon - Extended Frequency

Extended Frequency Range

https://www.guided-ultrasonics.com/wp-content/uploads/2016/08/Icon-GPS-1-e1470317790864.png

Built-In GPS

Supplied With:

Icon - WavePro

Software Licence

Lemo Cables

Icon - USB

USB Cable

Optional:

  • Laptop computer with pre-installed WavePro™
  • Wide range of LEMO cables
  • EFC Processing Licence
  • Absolute Calibration Software
  • Ethernet Adaptor Cable (for LAN connection)
  • In-car charger
  • Warranty Extension Options

Icon - Plug

Mains Charger

Icon - Bag

Soft Bag

Top