Training FAQs

Following the completion of one of our Qualification courses and successful qualification examination, you are required to provide validation evidence in the form of 40 hours industrial experience obtained within 12 months. The evidence is reviewed by GULT examiners, and once approved, the qualification certification is issued along with a GULT inspector card.

Please compile your documents as follows.
For GUL Screening Qualifications (links below open in new tab):

• Level 1:Pipe: 2 screening test files, filled TF147 form, visual acuity test result from within the last 12 months and a profile photo.
• Level 2:XB or SP: 4 screening test files within the qualifying sector, filled TF148 form, visual acuity test result from within the last 12 months and a profile photo.

For GUL Monitoring Qualifications:

• Level 2:PM: refer to and fill TF150 form, visual acuity test result from within the last 12 months and a profile photo.

For GUL Scanning Qualifications:

• Level 1:Q: 10 scan files, filled TF191 form, visual acuity test result from within the last 12 months and a profile photo.
• Level 2:QT: 25 scan files, filled TF192 form, visual acuity test result from within the last 12 months and a profile photo.

Submit all paperwork and forms on our Validation/Renewal Form, and submit test files via the GUL Trunk®.

Late validation may incur fees and resitting the qualification examination again.

Please refer to the GULT Qualification and Certification Scheme.

Please compile your documents as follows.
For GUL Screening Qualifications (links below open in new tab):

Level 1:Pipe: 2 screening test files, filled TF147 form, visual acuity test result from within the last 12 months and a profile photo.
Level 2:XB or SP: 4 screening test files within the qualifying sector, filled TF148 form, visual acuity test result from within the last 12 months and a profile photo.
For GUL Monitoring Qualifications:

Level 2:PM: refer to and fill TF150 form, visual acuity test result from within the last 12 months and a profile photo.
For GUL Scanning Qualifications:

Level 1:Q: 10 scan files, filled TF191 form, visual acuity test result from within the last 12 months and a profile photo.
Level 2:QT: 25 scan files, filled TF192 form, visual acuity test result from within the last 12 months and a profile photo.
Submit all paperwork and forms on our Validation/Renewal Form, and submit test files via the GUL Trunk®.

Late validation may incur fees and resitting the qualification examination again.

Please refer to the GULT Qualification and Certification Scheme.”
}
}
}

GULT qualification certifications are valid for 3 years from day of issuing. Following this qualifying period, the certification must be renewed to remain valid.

Payment in advance is required for renewals, you can pay via our online shop using a credit card.

Certification renewal requires the certificate holder to provide of evidence of continued satisfactory work activity. The evidence is reviewed by GULT examiners, and once approved, the new qualification certification is issued along with a new GULT inspector card.

Please compile your documents as follows:

• Provide a minimum of one test file per each qualifying year. The files must be collected by GUL equipment and fully analyzed according to GUL Procedures.
• Fill and sign TF149 form; make sure your line-manager signs at the dedicated place on the form.
• Provide visual acuity test result from within the last 12 months.
• Provide a profile photo.

Submit all paperwork and forms on our Validation/Renewal Form, and submit test files via the GUL Trunk^®.

It is the responsibility of the certificate holder to renew their certificate before expiry. We recommend providing all required evidence well in advance to avoid delays and certification lapse. Late renewal within 12 months following expiry will incur a late renewal fee. Certificate expiry of over 12 months will require a re-certification process and associated fees.

Please refer to the GULT Qualification and Certification Scheme for further details.

You can check:

• Your Certificate
• Your GUL inspector card

Attach your iButton to a Wavemaker or QSR instrument and read the information displayed on the screen.

The software is frequently updated.

You will find updates for the Wavepro software on the software updates webpage.

You can also look for updates from the WavePro/WaveProQSR software. Go to ‘Help’ and select ‘Check for WavePro Update’. Once the installation file has been downloaded and extracted, you will require the Wavemaker or QSR instruments to activate the software update.

Make sure:

• You have downloaded and installed the iButton reader drivers. Visit the software updates
• You have a valid iButton

Connect your GUL iButton to a USB iButton reader and connect the reader to your computer and launch WavePro.

GULT open courses are organised regularly throughout the year.

Our list of Upcoming courses is regularly updated. Register your interest in taking a course with us on GULT Course Registration Form.

Please note a minimum number of candidates is required for a course to be held.

Places on GULT courses are only secured by providing a purchase order and payment in advance. Places on courses can be purchased via our online shop or via bank transfer.

Email training@guided-ultrasonics.com for further information and to receive a quotation and Proforma invoice.

Please refer to the GULT Qualification and Certification Scheme.

Please fill the GULT Course Registration Form

We are always delighted to receive any feedback. Your feedback is valuable to our operation and continuous improvement.

Please fill the GULT Course and Examination Feedback Form or send us an email at: training@guided-ultrasonics.com