HT solid rings are milled from aluminium and can be used on pipes up to 350°C (660°F) if the correct procedures are followed.
Solid rings are attached to the pipe by tightening the two large handles which push the spring loaded transducers onto the pipe to obtain good shear coupling.
HT solid rings work with all versions of the Wavemaker®.
Key application areas include:
2″ to 8″ NPS
High Temperature Operation
Spring Loaded Transducers
Robust Milled Body
|Number of channels||16 channels by default (12 for 2″)|
|Nominal Pipe Sizes||2″, 3″, 4″, 6″, 8″ (DN 50 to 150)|
|Operating Temperature||-40° to +350°C (660°F)|
|Radial Clearance||50mm (2″)|
|Compatibility||Any Wavemaker® instruments|