The 'Fully Loaded' instrument is capable of working with all of the pipe and tube transduction systems produced by GUL. It is suitable for both the lower frequencies that are used for buried and coated pipes and the higher frequencies that are used with HD rings for support inspection and higher sensitivity to pitting. With one button press, the instrument can be placed into gPIMS Collector mode to allow a minimally trained operator to collect repeat data from a permanently installed gPIMS sensor.
The instrument has similar capabilities to the Wavemaker® G4 with the LF+MF option installed. However, it only contains 16 channels (compared to the 32 channels for the standard Wavemaker® G4); therefore you will need a pair of channel reducers when joining EFC or HD inflatable rings together to collect data on very large diameter pipes.
- Laptop computer with pre-installed WavePro™
- Wide range of LEMO cables
- EFC Processing Licence
- Absolute Calibration Software
- Ethernet Adaptor Cable (for LAN connection)
- In-car charger
- Warranty Extension Options