Guided Ultrasonics, Guided Wave Inspection Specialists
Wavemaker® G4 Mini Fully Loaded
The 'Fully Loaded' instrument is capable of working with all of the pipe and tube transduction systems produced by GUL. It is suitable both the the lower frequencies that are used for buried and coated pipes and the higher frequencies that are used sith HD rings for support inspection and higher sensitivity to pitting. With one button press, the instrument can be placed into gPIMS Collector mode to allow a minimally trained operator to collect repeat data from a permanently installed gPIMS sensor.
Wavemaker® G4 Mini Basic
The G4mini Basic is compatible with the default 'Solid', 'Slinky', 'EFC', and 'High Temperature' rings that are normally used for screening uncoated above ground pipes to detect areas of corrosion.
gPIMS Collector G4 Mini
Wavemaker WaveProTM Software
The solid transducer rings are typically used for standard screening of pipes with nominal size between 2 and 8 inches in diameter. The rings are attached to the pipe by tightening the two large handles which push the spring loaded transducers onto the pipe to obtain good shear contact.
Inflatable EFC Rings
HD Inflatable Rings
The use of this type of transducer ring requires the Wavemaker® G4 with the medium frequency option, or the Wavemaker® G4mini.
HD Solid Rings
HT Inflatable Rings
Low Profile Rings Slinky
Sub Sea GWT
Large Diameter Pipe Testing
Small Diameter Pipe Testing
Permanently Installed Monitoring